I just got an Arduino Nano Every and when I first plugged it in the builtin LED started flashing, and it wasn't recognizing that it was plugged in. But I tried uploading a really simple servo sketch but it just said that the upload failed. So I chose a random port and it finished uploading but the servo didn't move... How can I fix this? Thanks! [image]

[image] ace595: I tried another from the pack and it didn't work What Port was it showing? Was this board running Blink as well. If so, both boards were programmed successfully by Arduino before packaging and shipping. I'd be focusing on Windows 10 usb issues and not assuming defective boards.

[image] ace595: Board: "Arduino Nano Every, ATMEGA328" Huh? Please double-check that.

They were both flashing the builtin LED when I first added power, but I couldnt upload new code

[image] cattledog: What Port was it showing? Was it also at COM1? Do you get the usb tone when you you plug/unplug the usb connector?

Do you have access to any other Win10 computer to try? I think there is an issue with USB on the computer you are using.

I dont think so, they arent mine and dont have the IDE installed Also when I try another port don't he PC it doesn't work either

Can you show what you see in Device Manager under Ports(COM&LPT)? What do you see if you double click on what shows up as the connected device? EDIT: What procedure did you follow to change the COM Port from 1?

This is what it should like, with the computer recognizing a Nano Every on the port. Mine is on 9. [COMPort_Capture] If you go into Device Manager,double click on the "Comunications Port (COM1)" What do you see for "Driver" and "Driver Details" This is what is working for me with a NanoEvery and Win 10 [Driver] [WindowsDriver] Another idea would be to change the Com Port from 1 to something else, but I'm not sure it will help if there is a usb driver issue. Under Port Settings "Advanced" you can change the Port from 1 to something else. Maybe that will help. What have you done to verify that the usb cable is full data, and working properly?

The error message in your first posting is a little jumbled. Can you please compile and try to load the Blink example sketch with File>Preferences and then with show verbose output during compile and upload checked. Please copy what you see using the code tags.

Cannot Upload To Nano Every

Official Hardware Nano Family Nano Every

pert September 17, 2024, 3:53am 37

@ace595 has created a dedicated topic for discussion of the problem uploading to the UNO R4 Minima board:

Please use that topic for any discussion related to the UNO R4 Minima, and this topic for any discussion related to the Nano Every.

Topic		Replies	Views
Nano Every fails to upload sketch Nano Every	12	414	May 8, 2025
Cannot upload to Arduino Nano Every Nano Every	18	1206	December 17, 2024
Nano Every : Not uploading Uploading	34	2006	May 26, 2023
Nano Every, Error Uploading IDE 1.x	9	2777	November 27, 2021
Every Nano Uploading Errors Nano Every	16	269	July 30, 2026

Cannot Upload To Nano Every

Related topics