Coding Problems Help Me

[rohith675]

Hey Guys This Time Its A New Problem. Iam making accident detectoe. Last time i had different questions this time its different.
This Time I Am Having Doubts In Serial Communication. Actually I Tried Testing TheMpu6050 And It worked. But in my whole code when I Test Sometimes the Mpu6050 Failed To Initialize. But sometimes it initialize but it isn't printing The Values from Mpu6050. Actually i dont know much about serial connections. Maybe I Think Its Because Of An Interruption In those Connections.

So Please Help me what to do. And Tell Me What to do. What are the ways i can do to make the connextion stable and are there any other problem.

[UKHeliBob]

The problem may be in the sketch that you have not posted or in the circuit that you have not posted or it may be caused by the type of board that you are using that you have not told us about or maybe the power supply that we don't know the details of

Sorry, but without more details helping you is going to be impossible

[awneil]

Some good, clear photos of your setup would also be helpful.

@rohith675

Maybe I Think Its Because Of An Interruption In those Connections

So what have you done to investigate that?

You Seem To Have An Intermittent Problem With Your Shift Key - Perhaps You Could Also Check That Out ... ?

[J-M-L]

so basically it's the same question as

Accident Detecting System Help Needed

Hey guys actually iam making an accident detector with mpu 6050 ,neo 6m gps moule ,sim 800L gsm and arduino mega.i went to check in the serial monitor if this code works.but it showed mpu initialization failed. the wiring is VCC to 5V GND TO GND SDA TO PIN 20 of mega SCL TO PIN 21 of mega #include <Wire.h> #include <TinyGPS++.h> #include <Adafruit_MPU6050.h> #include <Adafruit_FONA.h> #include <SoftwareSerial.h> // Define MPU6050 object Adafruit_MPU6050 mpu; // Define GPS object TinyGPSP…

you don't need to re-create a topic for that

[awneil]

@J-M-L

basically it's the same question as

That thread seems to have been deleted?

[J-M-L]

I still see it at
https://forum.arduino.cc/t/accident-detecting-system-help-needed/1173382

and the forum software does show the snapshot too

Accident Detecting System Help Needed

Hey guys actually iam making an accident detector with mpu 6050 ,neo 6m gps moule ,sim 800L gsm and arduino mega.i went to check in the serial monitor if this code works.but it showed mpu initialization failed. the wiring is VCC to 5V GND TO GND SDA TO PIN 20 of mega SCL TO PIN 21 of mega #include <Wire.h> #include <TinyGPS++.h> #include <Adafruit_MPU6050.h> #include <Adafruit_FONA.h> #include <SoftwareSerial.h> // Define MPU6050 object Adafruit_MPU6050 mpu; // Define GPS object TinyGPSP…

[awneil]

@J-M-L

I still see it at
https://forum.arduino.cc/t/accident-detecting-system-help-needed/1173382

But that's locked, and the only thing I see there is:

Perhaps you see more as a Moderator?

[J-M-L]

ah no,

that was the post that got merged and then it probably got killed by a moderator

now it's

Help me with my project

hey guys iam making an accident detector using arduino mega,mpu6050 ,neo 6m gps module and sim 800L gsm module.and i want you guys to review my code and tell if it will work and if there are any corrections please tell me and i would be happy about that.and kindly if u can provide any suggestions please feel free to provide them.thank you here's the code #include <Wire.h> #include <TinyGPS++.h> #include <Adafruit_MPU6050.h> #include <Adafruit_FONA.h> #include <SoftwareSerial.h> // Define MPU6…