Hello,
As in:
https://forum.arduino.cc/t/craftboard-avr128da64-easy-to-use/1075540
Quickly upload firmware and then watch the serial monitor. No need 2 serial converters.
Via a micro switch on the board, you choose whether it is in: upload code (UPDI) or serial interface mode.
An extremely handy board if you plan to use some of these:
ATtiny3227;ATtiny3217;ATtiny1627;ATtiny1617;ATtiny1607;ATtiny827;
ATtiny817;ATtiny807;ATtiny427;ATtiny417
ATtiny3226;ATtiny3216;ATtiny1626;ATtiny1616;ATtiny1606;ATtiny826;
ATtiny816;ATtiny806;ATtiny426;ATtiny416;ATtiny406;
ATtiny3224;ATtiny1624;ATtiny1614;ATtiny1604;ATtiny824;ATtiny814;
ATtiny804;ATtiny424;ATtiny414;ATtiny404;ATtiny214;ATtiny204;
ATtiny412;ATtiny402;ATtiny212;ATtiny202;
Special thanks to Spence Konde for Arduino support.
