Today I received my first Digispark ATtiny85 1$ modules (with micro USB connector , still waiting for Digispark kickstarter version -- that one can be inserted into Nanopi Neo or Orange Pi Zero USB connector directly). Installation of board in Arduino IDE was easy following these instructions . On f…

No question, just wanted to post (positive) experiences with new ATtiny85 module. I thought that "Microcontrollers" forum was best match for this. The more I look into the Arduino IDE Digispark demos, the more I am impressed. Only Due and Leonardo Arduinos support Keyboard library . But 1$ ATtiny…

Yes, those are a little bit interesting. I have a couple of them laying around, although I don't use them very often. Beetles are about the same size but are the equivalent of a Leonardo. They cost about $7. Of course, they are 7 times more interesting... :slight_smile:

For 7$ there is much more fun on the other side of the spectrum :wink: [quad core 1.2GHz+USB+ethernet+wifi]

That does look good, in a different category and larger size I suppose. It reminds me of the Raspberry Pi Zero, except larger and more stuff on the board.

Took a while to find a TM1637 library that works with Digispark ATtiny85. DigitalTube library does: libraries/DigitalTube at master · reeedstudio/libraries master/DigitalTube my Arduino libraries... Contribute to reeedstudio/libraries development by creating an account on GitHub. …

When installing Digispark ATtiny85 board in Arduino IDE you get quite some libraries ready to use. "TinyRTClib.h" library allows to interface with DS3231 real time clock module ( has accuracy of 5s/month ). The lipo is backed up by a CR2032 battery on DS3231 module. Clock displays hh:mm for 2 secon…

Today I wanted to program ATtiny85 with an old 2007 Eee PC, and wanted to try that with Arduino Create. But that was foredoomed by Create plugin being available for 64bit archictecture only. OK, then I installed 1.8.0 IDE, added board and added the digispark.rule. Programming ATtiny85 worked as be…

Below is small sketch demonstrating 1/8/16 MHz processing for ATtiny85. Slow Led flickering with 1, fast flickering with 8 and always on Led with 16 MHz. Just select board "Digispark (Xmhz - No USB)" with X∈{1,8,16}. Hermann. void setup() { pinMode(0, OUTPUT); //LED on Model B …

Digispark quickref shows two functions, one to read the internal temparature sensor, and the other reading Digispark input voltage. The sketch uses a LCD to display. I only have a Digispark ATtiny85 module and a USB cable currently, so made use of DigiKeyboard library as before. I compiled below s…

Digispark ATtiny85 micro USB module

Community Products and Services

DrAzzy December 14, 2016, 11:34pm 2

Did you have a question?

As an aside, the way that #define is being (ab)used there is horrifying.

Topic		Replies	Views
USB ATTiny85 comms vs. SoftwareSerial - Solved See post #48 General Guidance	58	564	June 5, 2026
DIFF Messung Gain 20X beim ATTiny85 Deutsch	67	404	January 26, 2026
ATtiny85 and latest IDE IDE 2.x	46	9166	March 6, 2025
Digispark Attiny85 USB not recognized by Windows 11 IDE 2.x	30	4725	October 23, 2025
TinyCore - a new Arduino core for classic ATtiny chips 3rd Party Boards	21	565	June 1, 2026

Digispark ATtiny85 micro USB module

Related topics