Hi everyone :slight_smile: Id like to build a gimbal by myself with brushless motors and arduino. A lot of people are using an Alexmos 32bits to drive the motors but this is a pre- programmed card and id like to do it myself with an arduino uno. So here is my setup : 1x arduino uno 1x MPU6050 a…

Use the forum Google search function in the upper right of this page to search for the key words of your project. You will probably find many similar previous project discussions and code to get you started.

You need direct control of the 3-phase bridge to control a gimbal motor, not an ESC. You need to understand the principles of field-oriented motor control if you're to succeed without using a prebuilt controller unit. They are very different to most other motor systems you may have encountered. Adv…

DIY gimbal with brushless motors and arduino

Other Hardware Motors, Mechanics, Power and CNC

zwieblum January 14, 2020, 8:08am 2

Motors are geared or not geared? What drivers do you use? ...

Topic		Replies	Views
I will make 2-axis gimbal with BLDC motor. plz help me. Motors, Mechanics, Power and CNC	3	1464	May 6, 2021
ESP32 and ESC for spinning a homemade brushless mtoor General Guidance	21	166	May 11, 2026
Pilotare un motore Brushless come un normale motore DC Generale	12	1287	September 20, 2024
Gimbal: controlling brushless motors without ESC Motors, Mechanics, Power and CNC	1	1000	May 6, 2021
Is it possible to use a Yi 3-axis Gimbal with Arduino Uno? Device Hacking	9	730	October 30, 2023

DIY gimbal with brushless motors and arduino

Related topics