Empfangen und Senden eines GPS-Signals

[mospar19]

Hello all,
I managed to receive a GPS signal with the Neo 6-m module connected to the Arduino.
Now I want to send the signal from the Arduino to a controller.
Maybe you also have an idea that I can use.

[TomGeorge]

Hi, @mospar19
Welcome to the forum.

Please read the post at the start of any forum , entitled "How to use this Forum".

How to get the best out of this forum

See also FAQ - Arduino Forum for general rules on forum behaviour and etiquette. Hello, Welcome to the Arduino Forum. This guide explains how to get the best out of this forum. Please read and follow the instructions below. Being new here you might think this is having rules for the sake of rules, but that is not the case. If you don’t follow the guidelines all that happens is there is a long exchange of posts while we try to get you to tell us what we need in order to help you, which is fru…

What is the other controller, is there a reason why it cannot get readings directly from the GPS itself?

Tom...

[srnet]

@mospar19

Now I want to send the signal from the Arduino to a controller.
Maybe you also have an idea that I can use.

Perhaps explain why you want to do this and what the project is ?

And in particular how far, and what is the location, of the Arduino (with the GPS) from this 'controller' ?

[uwefed]

Crosposting with Senden eines GPS-Signals - #9 by mospar19
Uwe