Error while burning bootloader, Mega burns UNO

Using Arduino Avrdude, stk500, Bootloader issues
1

Hi. I know this problem isn't new, but i haven't found my solution.

error massage :

"

D:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CD:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf -v -patmega328p -cstk500v1 -PCOM3 -b19200 -e -Ulock:w:0x3F:m -Uefuse:w:0xFD:m -Uhfuse:w:0xDE:m -Ulfuse:w:0xFF:m 



avrdude: Version 6.3-20190619

         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

         Copyright (c) 2007-2014 Joerg Wunsch



         System wide configuration file is "D:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf"



         Using Port                    : COM3

         Using Programmer              : stk500v1

         Overriding Baud Rate          : 19200

         AVR Part                      : ATmega328P

         Chip Erase delay              : 9000 us

         PAGEL                         : PD7

         BS2                           : PC2

         RESET disposition             : dedicated

         RETRY pulse                   : SCK

         serial program mode           : yes

         parallel program mode         : yes

         Timeout                       : 200

         StabDelay                     : 100

         CmdexeDelay                   : 25

         SyncLoops                     : 32

         ByteDelay                     : 0

         PollIndex                     : 3

         PollValue                     : 0x53

         Memory Detail                 :



                                  Block Poll               Page                       Polled

           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack

           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

           eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff

           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff

           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00



         Programmer Type : STK500

         Description     : Atmel STK500 Version 1.x firmware

         Hardware Version: 2

         Firmware Version: 1.18

         Topcard         : Unknown

         Vtarget         : 0.0 V

         Varef           : 0.0 V

         Oscillator      : Off

         SCK period      : 0.1 us



avrdude: AVR device initialized and ready to accept instructions



Reading | ################################################## | 100% 0.03s



avrdude: Device signature = 0x000000 (retrying)



Reading | ################################################## | 100% 0.02s



avrdude: Device signature = 0x00ff00

avrdude: Expected signature for ATmega328P is 1E 95 0F

         Double check chip, or use -F to override this check.

And wiring:

Board: UNO
Programmer: "Arduino as ISP
Burn bootloader

Please help me.

2

Avrdude does not recognize chip ID. is Uno burned?

3

How can i test it? The "the loopback test" was passed.

4

BN Arduino UNO
vid 2341
pid 0043
sn 55736313238351110240

5

congratulations. you read successfully atmega16u2. pull atmega328 from socket. check that all pins are not bend and put carefully back.
pull not with hands. use tools as lever.

6

Pardon me. Do you mean "This board can't be burnt? and i need to replace the main processor." ?

7

I checked the text on the top of the chip. It's ATMEGA328.

8

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.