ESP8266 not running oled properly

updated example to do some more prints

void setup() {
  Serial.begin(115200);
  while(!Serial);
  delay(1000);
  Serial.println("\nSSD1306 LCD test");
  // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
  if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
    Serial.println(F("SSD1306 allocation failed"));
    for(;;); // Don't proceed, loop forever
  }
 Serial.println("\nSSD1306 LCD found OK");

if the I2C address is incorrect (e.g.0x3D) the serial monitor displays

SSD1306 LCD test

SSD1306 LCD found OK

as though all is OK and LCD found (nothing appears on the LCD)
i.e. I would have expected it to display and go into endless loop

Serial.println(F("SSD1306 allocation failed"));