PC-Arduino comms using Node-red

Hi.

I've seen "Demo of PC-Arduino comms using Python" at :

http://forum.arduino.cc/index.php?topic=225329.msg1630844#msg1630844

But instead using python, I would like using node-red to make an HMI and fill a datafile from the Arduino.

The Arduino would get the start procedure from node-red and act as a temperature regulator and a datalogger (time, temperature of multiple sensor), then send back data to node-red to fill datafile.

Any link or advices would be appreciated.

hary: Hi.

I've seen "Demo of PC-Arduino comms using Python" at :

http://forum.arduino.cc/index.php?topic=225329.msg1630844#msg1630844

But instead using python, I would like using node-red to make an HMI and fill a datafile from the Arduino.

The Arduino would get the start procedure from node-red and act as a temperature regulator and a datalogger (time, temperature of multiple sensor), then send back data to node-red to fill datafile.

Any link or advices would be appreciated.

You know enough to know about node-red but cannot even bother to read its documentation? ? ? https://nodered.org/docs/hardware/arduino

.

You already have all the info I have to offer :)

If you don't know Node-Red sufficiently well to adapt my code why not just use Python?

...R

Robin2: You already have all the info I have to offer :)

If you don't know Node-Red sufficiently well to adapt my code why not just use Python?

...R

He wants IoT. And he thinks Node-Red will make it "easier" for him to do that.

Using an "obscure" language not used by [u]most[/u] Arduino people means one must be the pioneer which means one must be prepared to go it alone without someone to pave the way. Me I'd rather someone pave the way.

.