Possibility control nrf24l01 by handy andremote control another nrf24l01

[ax3lpl]

Approx. so I understand that on the arduino forum I will not find anyone who would be able to write code for Arduino Uno + Nrf24l01 which would check the operation of boards and modules? XD How should I learn something when there is no documentation that describes the use of commands? XD You are kidding me by saying that I accuse you of lacking knowledge that you de facto do not have. xD

21:30:15.129 -> Data Sent Message 0  Tx failed
21:30:16.222 -> Data Sent Message 0  Tx failed
21:30:17.348 -> Data Sent Message 0  Tx failed
21:30:18.440 -> Data Sent Message 0  Tx failed
21:30:19.533 -> Data Sent Message 0  Tx failed
21:30:20.659 -> Data Sent Message 0  Tx failed
21:30:21.751 -> Data Sent Message 0  Tx failed
21:30:22.844 -> Data Sent Message 0  Tx failed
21:30:23.937 -> Data Sent Message 0  Tx failed
21:30:25.063 -> Data Sent Message 0  Tx failed
21:30:26.155 -> Data Sent Message 0  Tx failed

with this code:

Simple nRF24L01+ 2.4GHz transceiver demo

Two-way transmission If the slave is required to send data back to the master it would seem necessary for the two devices to swap roles. Among other things that will mean that the "master" will need an address as well as the slave. The question of timing also needs to be considered - for example, how long should the master continue listening for the reply from the slave? And, if the slave is trying to write rather than listen it may miss a transmission from the master. Two-way transmission usi…

is there anyone in this forum who has knowledge about arduino? Only serious answers.