Hello, right now I am trying to get a light and sound to play simultaneously for one second on and one second off, repeating four times but only when the potentiometer is in a particular range. If the potentiometer is moved the light and sound should stop and reset once the potentiometer is moved back into range. If the potentiometer stays within range, the light and noise shouls stop after 4 cycles. I will post full code, but the part I seek help on is the last if statement thats between values 513-768. int hertz = 1000; int bomb = 200; void setup() { pinMode(8, OUTPUT); pinMode(9, OUTPUT); pinMode(10, OUTPUT); pinMode(11, OUTPUT); pinMode(12, OUTPUT); pinMode(7, INPUT_PULLUP); } void loop() { for(int hertz = 1000; hertz = 257 && analogRead(A0) = 257 && analogRead(A0) =513 && analogRead(A0) <= 768) { for(int i = 0;i <4; i++) { digitalWrite(9, HIGH); tone(8, hertz, 1000); delay(1000); digitalWrite(9, LOW); delay(1000); } } }

The first thing you need to master is how to make non-blocking TIMERs. i.e. avoid using delay(...) [image] Using millis() for timing. A beginners guide Introductory Tutorials Part 2 We have seen how to turn an LED on and off at intervals which is fascinating for maybe a minute or two at most but how about using the same principle to change the brightness of an LED ? I will use an LED on pin 10 in this example as that pin supports PWM output. The basis of the program will be the same as before except that when the period ends the brightness of the LED will be changed. The period will be much less than 1 second, unless you want to wait a long while, but otherwise the…

In general, you should not use magic numbers. The I/O pins love to have a functional name.

[image] brmxcy: play simultaneously for one second on and one second off, repeating four times but only when the potentiometer is in a particular range. If the potentiometer is moved the light and sound should stop and reset once the potentiometer is moved back into range. If the potentiometer stays within range, the light and noise shouls stop after 4 cycles. i hope this is saying you want something to happen no more than 4 times after the pot value is within a certain range looks like the code toggles pin 12 and generates a tone from 1 to 4K if the pot cnt) { cnt++; Serial.println ("action"); tone(8, hertz, 1000); delay(1000); } } else { cnt = 0; Serial.println (potVal); delay (500); } } void setup() { Serial.begin (9600); }

Repeat a task 4 times then stop

Projects Programming

LarryD October 29, 2023, 7:45pm 2

The first thing you need to master is how to make non-blocking TIMERs.

i.e. avoid using delay(...)

Topic		Replies	Views
Working on a project with 2 potentiometers 2 push buttons 2 LEDs and 1 buzzer Programming	36	650	June 11, 2025
Help with code - play tone sequence if input LOW Programming	46	827	August 14, 2025
How to get this script to play the only mp3 file on the card every 20 minutes Programming	21	399	August 4, 2025
Arduino newbie in need of help Programming	17	1068	June 16, 2022
Pots do not control relay times Programming	39	1215	September 8, 2023

Repeat a task 4 times then stop

Related topics