Anyone know how to configure a pin on a SAMD51 like Adafruit's M4 Metro or Feather Express such that it calls a function on a button press? An example from Adafruit for the nRF52480 called "digital_interrupt_deferred" has something like this. The code looks like this: pinMode(interruptPin, INPUT_PULLUP); attachInterrupt(interruptPin, digital_callback, ISR_DEFERRED | CHANGE); It then calls that function when the pin state changes ... very neato. Anybody know how to accomplish something similar on a SAMD51 type board?

I believe that attachInterrupt() works similarly on SAMD51 boards. There's a complication that there are only 16 pin interrupts, shared by more than 16 pins, and only one pin that shares an interrupt will actually generate the interrupt (last one enabled, first one enabled? Not sure.) But that shouldn't matter for a single button. I don't think that the SAMD51 has ISR_DEFERRED, though. It'd look like: attachInterrupt(interruptPin, digital_callback, CHANGE); (attachInterrupt is a standard Arduino Core function, though some of the details can change.)

Excellent, thank you everyone: void setup() { Serial.begin(9600); while (!Serial); delay(50); attachInterrupt(digitalPinToInterrupt(12), anISR, CHANGE); } void loop() { } void anISR() { Serial.println(digitalRead(12)); }

SAMD51 Interrupt via Button Press

Other Hardware 3rd Party Boards

rtek1000 October 6, 2019, 7:50am 2

It might help:

Post here about your Arduino projects, get help - for Adafruit customers!

Topic		Replies	Views
Interrupts no working at all GIGA R1 WiFi	1	149	June 6, 2026
Cannot get SAMD21 Interrupt to function 3rd Party Boards	2	285	June 1, 2025
Which Interrupt pins can I use Programming	10	420	November 12, 2024
Interrupt on SAMD21 / definition Programming	3	2293	January 18, 2021
ATtiny85: Using pin interrupts on PB3 makes PB1 unusable General Guidance	3	198	May 21, 2025

SAMD51 Interrupt via Button Press

Related topics