SIM800L call private number

Projects Programming
1

Hi Guys,

i use SIM800L modul. How can i set, if i make a call with this, do not have the number hidden on the receiving device? I see only on receiver phone: "private number".

Thanks.

2

have a look at AT+CLIR=<n>

Write Command
AT+CLIR=
Response
TA restricts or enables the presentation of the CLI to the called party when originating a call.
The Command overrides the CLIR subscription (default is restricted or allowed) when temporary mode is provisioned as a default adjustment for all following outgoing calls. This adjustment can be revoked by using the opposite Command.
OK
If error is related to ME functionality:
+CME ERROR:

Parameters
(parameter sets the adjustment for outgoing calls):
0 Presentation indicator is used according to the subscription of the CLIR service.
1 CLIR invocation
2 CLIR suppression

(parameter shows the subscriber CLIR service status in the network):
0 CLIR not provisioned
1 CLIR provisioned in permanent mode
2 Unknown (e.g. no network, etc.)
3 CLIR temporary mode presentation restricted
4 CLIR temporary mode presentation allowed