An error occurred while uploading the sketch

Development Tools IDE 1.x
1

Hello, i'm having trouble working my way around this error, i'm running:

Windows 10 64bit
Arduino IDE 1.8.11
Arduino Nano 33 BLE

I've tried all the suggestions I found, double click the reset button, moved to USB2 port, change the cable, remove/reinstall IDE, update all boards and libs, disable the firewall but no joy.

the nano is connected and the IDE recognizes it:

737×1443 287 KB

however, I still get this error...
any help will be highly appreciated!
many thanks!
Ram

(full verbus output is attached )

nano_33_log.txt (63.7 KB)

2

You have the wrong board selected, thus the error. Select Tools > Board > Arduino Nano 33 BLE and try uploading again.

1 Like
3

430×539 53.1 KB