Hello all, I am new to this so please be patient with me. I have a project that involves two double relays, two motors and a push button switch. When I wire everything together and run my code, double relay (1)only runs the motor(1) in one direction and instead of going the other direction the rela…

Please share your code and schematic (circuit diagram)

You will get help faster if you provide the information that we need in order to help you. Please read the how to get the most from the forum post. Please read the forum guidelines to see how to properly post code and some information on making a good post. Use the IDE autoformat tool (ctrl-t or…

[image] ana24: Does anyone have any ideas? Oh and I tried to debug by having that relay and motor run on its own, and it ran perfectly. But once the push button switch and other relay and motor are added the issue begins. Any ideas? the idea that solves everything is providing the complete s…

Hey I added my code and schematic. I didn't think it through when positing.

RE-edit your post to show your code as a code-section [image] Make experienced users help: two ways to quickly post code as a code-section Tutorials Hi newcomer, This thread wants to show you how you can speed-up getting helpful answers with small effort. If …

The "H Bridge" which you have formed out of a DPDT relay to reverse the motor looks wrong to me. The N/O and N/C pins should be crossed over something like this: [image] EDIT Added COM labels to schematic.

Thank you again. I was able to post it right !

Hey, I am sorry but I am a but confused on the schematic you sent. So the motor is suppose to be connected to the N/C not the COM?

Do you have a digital multimeter? If you measure the "output" of your DPDT does the polarity change as expected? I'm a electronic hobbiest and have quite some experience with schematics. If I would like to analyse your schematic I would immidiately re-draw your schematic line by line so that the …

[image] ana24: n the relay light flashes on and off quickly and continues in the same direction Have you considered that you have NO WAY to turn the motors off?

Double Relay and motor issue: URGENT

Other Hardware Motors, Mechanics, Power and CNC

StefanL38 December 6, 2022, 3:43pm 6

RE-edit your post to show your code as a code-section

Topic		Replies	Views
[SOLVED] Relay 1 and 2 turn on and off very loud General Electronics	25	1429	April 30, 2023
What to do with GND/COM jumper - 12v pwr supl 8ch relay board, Arduino Uno r4 two DC motors General Guidance	44	225	December 4, 2025
Just destroyed 3 relay boards trying to reverse a motor Motors, Mechanics, Power and CNC	21	1161	October 29, 2022
How to GND the relay coil using program? Programming	44	1159	November 25, 2023
Controlling two dc motors 12V with two relays and arduino General Guidance	47	1660	July 6, 2023

Double Relay and motor issue: URGENT

Related topics