Hi, Im having Uploading to my New Board

Development Tools IDE 1.x
1

Hello, This is my first time using arduino and Im still relatively new to it. I was just trying to make an LED blink with this code:

const int LED =13;
void setup() { pinMode(LED, OUTPUT);
}

void loop() {

digitalWrite(LED, HIGH);
delay(1000);
digitalWrite(LED, LOW);
delay(1000);
}

However uploading was different story. When I had tried uploading it returned:

avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x94
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x94
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x94
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x94
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x94
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x94
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x94
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x94
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x94
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x94

I have tried looking at many other options to solve this problem and they have not been successful.
When I try to change the serial port I unfortunately do not have the option to do so(the option is greyed out). Ive also tried updating my drivers ,uninstalling and rebooting the program on multiple occasions, and also tried selecting different board types to upload to.
I honestly don't know what else to do.

Any alternative solutions will be greatly appreciated.

If you need to know which board I am working with it is this one:

Thank you.

2

You will must tell us more about your situation if you want help.

  • What OS?
  • Have you had success with other boards?

If your sure you have done everything you can, update Java!

It seems you have an Arduino Clone. You may have to use some a different driver.
Good Luck, Roger

3

Did you select Arduino/Genuino Uno as your board ?

Do you have an error in Device Manager?

Probably related to his other post Can't find the file ArduinoUno.inf [solved] - #4 by Ekin1 - Installation & Troubleshooting - Arduino Forum

4

regor2:

  • What kind of board?

That's in his unclickable link to Amazon in his post.