#include<Servo.h> Servo servo; const int BUZZER_PIN = 3; // Arduino pin connected to Buzzer's pin int led = 0; int Servomotor = 9; void setup() { servo.attach(9); Serial.begin(9600); // initialize serial } void loop() { int servoState = digitalRead(Servomotor); // read new s…

This one has the LED lighting up when the servo moves. ( As long as it's not going wide open. Must be tiny bit slower so that it's regulating the servo's speed. ) You can figure out how to make the Tone go. [image] slow servo - Wokwi Arduino and ESP32 Simulator Run IoT and embedded pro…

Hello jrom1 Welcome to the worldbest forum. My recommendation is to run a servo and button tutorial to get started. Have a nice day and enjoy coding in C++.

not clear what you're trying to do. servoMotor is presumably the pin the servo is attached to. yet you read it, int servoState = digitalRead(Servomotor); and report it as a button being pressed. i don't see any button pin defined not clear what the purpose if for driving the servo to the…

Hi, @jrom1 Welcome to the forum. [image] How to get the best out of this forum IDE 1.x See also FAQ - Arduino Forum for general rules on forum behaviour and etiquette. Hello, Welcome to the Arduino Forum. This guide explains how to get the best out of this forum. Plea…

[image] jrom1: int servoState = digitalRead(Servomotor); // read new state This is not a valid way to determine if the servo is turning. There is no way to determine if a servo is turning without opening the servo and wiring to the internal control electronics. That is beyond the scope of a…

My code does not work i'm working on making the piezo buzz and led to light up, whenever my servo turns

Projects Programming

TomGeorge May 1, 2023, 10:17am 5

Hi, @jrom1
Welcome to the forum.

Can you tell us in point/step form what you want your code to do?

What you have connected to your controller?

What model Arduino do you have?

Thanks.. Tom..

Topic		Replies	Views
Control de led, servomotor, mediante pulsador Software	8	296	June 2, 2025
Aiuto su un progettino personale Software	31	439	August 26, 2025
HELP program arudino :c Programming	10	226	May 15, 2025
LED turns on when servo turns 3rd Party Boards	2	124	July 7, 2024
Servo powered with batteries and a push button Robotics	20	978	February 22, 2024

My code does not work i'm working on making the piezo buzz and led to light up, whenever my servo turns

Related topics