i try to control a p mosfet via esp32 load is 42v 20mA im using bss138 n-fet and bss84p-fet but if u suggest to change i also have ilrml2502 and ilrml6402 that can use [m1] if i measure with multimetter all is ok but problem appear when i add the load and try to turn it on then i see 14V in…

P channel mosfet activate from esp32

arpa123 January 28, 2024, 12:13am 7

its a ignition wire for a blcd controller. so i need to connect that wire to Voltage to start the controller

Topic		Replies	Views
P channel mosfet with esp32 General Electronics	10	2105	July 23, 2024
MOSFET for ESP32 General Electronics	21	2924	March 6, 2025
Transistor won't switch on with 3.3v General Guidance	43	412	August 14, 2025
N-fet mosfet problem General Electronics	16	786	July 23, 2024
Electromagnets controlled by esp32 (pwm) and mosfets, problem with voltage drops and esp not working for high pwm values General Guidance	38	350	July 4, 2025