SMART Response XE support library

This week I'm working on custom code for the SMART Response XE classroom communicator. It's based on an ATMega128RFA1 which has a built in ZigBee transceiver, 384x136x2-bpp LCD and full keyboard. These are available used on eBay. They were discontinued several years ago, but are an interesting device for the price they're selling for (~$10 each). I've written a support library which allows using the LCD and keyboard. One of my first project ideas is to write a wired and wireless VT100 terminal.

Here's my github library: SMART Response library

20180805_071658.jpg|4032x3024

Which hardware package are you using to add support for the ATmega128RFA1 in the Arduino IDE?

pert: Which hardware package are you using to add support for the ATmega128RFA1 in the Arduino IDE?

I'm using the board support from a SparkFun (discontinued) product which used the same chip: Sparkfun guide is0-mick was the pioneer with this board. He shared a lot of useful info here: Arduboy thread

I wrote an OTA bootloader for it. Here's a blog post about it:

http://bitbanksoftware.blogspot.com/2018/09/my-adventures-in-writing-ota-bootloader.html

and the code is here:

https://github.com/bitbank2/SMART_bootloader