I need to use the following code for engine speed and km of a motorcycle. Or to put it more clearly, I want to use two sensors and two displays and two servos simultaneously in one card. Please help because I'm new and don't have much knowledge.
Hello all from a mechanical guy who knows just enough about Arduino to adjust others code to my needs.
I am trying to make a tachometer to constantly monitor the RPMs of the propellor shaft in a friend's 80 year old boat.
The chinese digital tachometers don't really fit the analog gauges in the dashboard, and are hard to read when the sun is shining on them. Of the shelf analog gauges are not available in the rpm range we need (0 to 1200 rpm) and the engine itself doesn't have a rev-counter.
…
gcjr
October 8, 2024, 11:30am
3
is the problem for you doing either of these two things or doing both in the same program?
Hi, @mohsen1363
See also FAQ - Arduino Forum for general rules on forum behavior and etiquette.
Hello,
Welcome to the Arduino Forum.
This guide explains how to get the best out of this forum. Please read and follow the instructions below.
Being new here you might think this is having rules for the sake of rules, but that is not the case. If you don’t follow the guidelines all that happens is there is a long exchange of posts while we try to get you to tell us what we need in order to help you, which is frus…
Can you please tell us your electronics, programming, arduino, hardware experience?
Have you tried the code as it is at the moment and got it to work?
Can you please post the code?
Thanks.. Tom..
system
April 6, 2025, 9:48pm
5
This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.
