I just opened the bag, plugged in the USB port from UNO to computer, the device manager doesn't see UNO.
The device manager sees the USB 2.0 but, not the Arduino.
What is the correct driver to install?
yeah good luck dude
It took me three weeks to figure it out and about 300 web pages and i still dont know what i did i just plugged it in this morning to give it one last shot before i microwaved a genuine UNO r3 and it worked.
maybe tell it your going to microwave it and see if the threat works.
SIMPLE hahahahahahahahahahahahahahahahaha
easy to learn hahahahahahahahahahahahahahahaha
Arduino is a joke isnt it come on lets not beat round the bush now
Hi billyreuben, look at the components on your Uno and see what make and model USB-to-serial chip it has, and install the driver for that chip. There are normally only 2 chips on the board with numerous legs, one of them being the ATmega328P processor, and the other being the USB-to-serial chip and that is usually close to the USB port. You may need a magnifying glass and good lighting. If it is a CH340G download the drivers for that chip, I believe that would at http://www.wch.cn/download/CH341SER_EXE.html