Just bought an official Arduino Robot from this site: Arduino Robot US Plug
Its not the one in the pictures in that link but rather a newer revision. Its 100% Genuine Arduino goodness, from the fancy outer box, to the quickstart guide. However I mistakenly rushed to upload my first sketch for this particular Arduino product, and I did not check the included LCD with the pre-loaded code that came on the control board out of the box. Now no matter what I do I can't get the stock LCD to display anything but the white background. I have checked all issues that might of been causing this on the hardware side of this hardware, and I can't find any problem in the circuity anywhere. This brings me to the software side of this which seems to be the cause as there seems to be better support for the LCDs from china. (and of coarse ladyada 
) In fact I can barely find enough information for the official Arduino made Robot LCD / TFT at times.
Well, I guess all I really need is someone who has access to a official Arduino LCD (Rev 3 is what I own) and an Arduino Robot OR Esplora, to make a bit of code that is verified to work with their LCD on their Esplora/Robot. Then send me the tested code as a .hex file. A .zip file would work too as long as it includes all the files used in the code. (meaning the ide, libraries, EVERYTHING used in the tested code)
Thanks