[Screenshot 2024-07-31 151738] i have tried Changing the com port so Meany times and re installing things i don't know what to do

Please forget about the Tools > Programmer menu selection. The menu selection only has an effect when you do an "Upload Using Programmer" or "Burn Bootloader" operation. It has absolutely no effect when you do a normal upload. So it makes absolutely no difference what you have selected from this me…

great thanks for that information!

Sketch uses 3956 bytes (13%) of program storage space. Maximum is 28672 bytes. Global variables use 149 bytes (5%) of dynamic memory, leaving 2411 bytes for local variables. Maximum is 2560 bytes. PORTS {COM1, COM11, } / {COM1, COM11, } => {} PORTS {COM1, COM11, } / {COM1, COM11, } => {} PORTS {COM1…

Did you do these steps? Yes or No? [image] sterretje: Step 1 Open Windows device manager. Double tap the reset button on the Pro Micro (or use a wire). The entry in Windows device manager should change for approximately 8 seconds. If you made these steps Do you see a change of the compo…

I have a special question. Maybe user @ptillisch knows this: The device-manager shows arduino micro [image] Though the board really has a Atmega 324U-chip [image] I made the following experiment: taking a Arduino pro micro = Atemga32U4 adjusting arduino IDE to [image] Arduino micro (which…

yes i did do this and the number did change and the device also said BOOTLOADER at the end for about 3 seconds

[image] StefanL38: where does the device-manager take the comport-name? It is a good question! I explain it in the second part of the post here: [image] Change board name, multiple boards of the same type Programming Questions I think it would be unexpected behavio…

Thank you. Uh ! wow. Never thought this would be so complex.

Thank you guys for all the help! i'm gonna give yall a huge shout out on stream today for the great imput!

[image] ectorplays: Thank you guys for all the help! It's not clear to me if you actually got the unit working correctly with both ports recognized and connected. What's the present status?

ARDuino is not taking any code i give it

Development Tools Uploading

sterretje August 2, 2024, 4:10am 48

This is the second time in a week that there is a Pro Micro clone with the 3 second bootloader. See Arduino pro micro keeps disconnecting - #8 by ueberuser.

Amen to that.

Topic		Replies	Views
Arduino Pro Micro hängt sich beim Programmieren auf Deutsch	29	369	June 5, 2026
Arduino Pro Micro not showing up Uploading	3	345	November 22, 2023
Pro Micro clone programmer error Uploading	34	574	May 27, 2025
Upload funktioniert nicht Deutsch	40	301	April 8, 2026
PROBLEM SOLVED - DEFECTIVE ARDURINO BOARD - I'm stumped. Can't upload any sketches to Uno or Mega, I could 9 years ago Uploading	23	335	May 7, 2026

ARDuino is not taking any code i give it

Related topics